Spare parts for the Stovax Stockton 11 stove

The Stockton 11 is a very impressive stove - made for a larger setting. It has an 11kw output and a big firebox. This means you can burn longer logs. It is available as a wood or multi fuel stove. You can also buy a multi fuel grate for the wood burner to change it to a multi fuel burner. You might have a 1 or 2 door model and you can either have the flat top, low or high canopy model. The flue outlet is 175mm - and is either top or rear outlet. Which one you choose depends on the setting you have placed the stove in. You can have a clip in boiler for this model - if you want to heat hot water and radiators from your stove too.

Technical data

  • Defra Exempt for Smoke Control Areas: No
  • Depth: 467mm
  • Efficiency: 76%
  • Energy Efficiency Class: A
  • Flue Diameter: 150mm
  • Fuel: Wood Burning
  • Height: 678mm
  • Height to Centre Rear Flue: 541mm
  • Max Heat Output: 14kW
  • Max Log Length: 500mm
  • Nominal Heat Output: 11kW
  • Width: 759mm

Technical Drawings

Door Sealed With: 14mm black soft rope seal kit
Glass Sealed With: 3mm ceramic rope seal
glass for 1 door model Glass for a single doored Stovax Stockton 11 stove. Make sure that you do not tighten the screws that hold the glass clips too much or you can risk cracking the glass especially when the stove gets hot.
at £82.72 inc. VAT
Glass for 2 door models Replacement glass for the Stovax Stockton 11 multfuel stove, double-doored model. One panel of glass is supplied.
at £43.56 inc. VAT
Stovax Stockton 11 Pre CE multifuel stove replacement side firebrick. This is for older models of stove.
at £48.76 inc. VAT