Spare parts for the Hunter Herald 6 stove

The Hunter 6 is a middle size stove - available as a wood or multi fuel stove. It is a 1 or 2 door model with high or low canopy or flat top. It is also available as a double sided stove with single depth or double depth to increase the heat output and the crosses on all the Herald range are now removable on the 2 door models - you can just take them off yourself for a plainer view of the fire. The air wash system will keep your glass clean - and should you need to order spares for the stove you will be able to do so on this site - To identify the model please also keep in mind that the stoves are also available with a longer leg - as an optional extra. The multi fuel grate can be in 2 positions 1. The normal multi fuel open grate - which you riddle with an external handle and 2. The bed turns to a flat bed position for wood burning -as wood burns well on a bed of ashes. Keep in mind that there is a 5 and 8 slim line Hunter model available as well. There are many types of Hunter stove with various spares for each type. There are MK1, MK2, Pre CE and CE - many with different spares. How can you tell which is which? Measure the glass and tell us. Count the grate bars or is it a static grate? If it has a metal throat plate then it is a MK1. If it has a board baffle (not metal) then it is a MK11. If the rear brick and baffle touch then it is a MK11. If there is a bar with holes in it inbetween the baffle and brick then it is a C.E. If in doubt contact us with these details! Rope seal for the doors varies according to age of model, older models use a 10mm rope for sealing the doors.

Technical data

  • Airwash: Yes
  • Cleanburning: Yes
  • Defra Exempt for Smoke Control Areas: Yes
  • Defra Exempt Possible: Yes
  • Depth: 406mm
  • Efficiency: 75.9%
  • Flue Diameter: 150mm
  • Fuel: Multifuel
  • Height: 567mm
  • Height to Centre Rear Flue: 459mm
  • Made of: Steel
  • Max Heat Output: 7kW
  • Max Log Length: 380mm
  • Min Heat Output: 5kW
  • Nominal Heat Output: 5.5kW
  • Width: 542mm

Technical Drawings

replacement stove glass double door Replacement glass panel for the two doored Hunter Herald 6 stoves.One panel of glass is supplied.This is for older models that use a rectangular glass.
at £49.58 inc. VAT
Grate bar low with thick end The Hunter Herald 6 low grate bar has a thick end and is placed alternately in the grate frame next to high bars with a thinner end. The stove uses 7 of these low bars, and 6 of the high bars. High and low grate bars are placed alternately in the grate frame to make up the stove grate, starting with the low bar.
at £15.45 inc. VAT
blanking plate This 6inch blanking plate covers the flue exit point that is not being used on the Hunter Herald 6 stove.This part is suitable for other Hunter stoves that have a 150mm flue outlet. Fixings are not included with this part.
at £30.01 inc. VAT
flue collar The Hunter Herald 6 stove flue collar is the part which the flue pipe fits into. This gives a tar and smoke tight seal between the stove and flue.
at £60.71 inc. VAT
The rear firebricks for the Hunter Herald MK1 6 wood burning stove. These bricks go at the back of the firebox, there are 5 in all, measuring 205 x 90mm. They protect the metal of the stove from being damaged by the heat in the firebox.
  • Height: 90mm
  • Width: 205mm
at £39.06 inc. VAT
Side firebrick for the Hunter Herald 6 MK1 multi fuel stove. There are two of these firebricks, one on each side of the stove firebox. Each firebrick measures 240mm X 110mm.
  • Height: 110mm
  • Width: 240mm
at £20.83 inc. VAT
baffle plate Mk1 The baffle plate (or throat plate) sits in the firebox of a stove and makes the flue gases travel further to get to the flue exit of the stove. The baffle makes the stove more efficient. This baffle plate is for a Hunter Herald 6 stove. This baffle has a pronounced angle.
  • Depth: 230mm
  • Width: 430mm
at £78.02 inc. VAT
ashpan An ashpan to fit Hunter Herald 6 stoves.
at £59.50 inc. VAT
An operating tool which lets you open the door without risk of being burnt as well as allowing you to riddle the grate on a Hunter Herald 6 stove.
at £24.03 inc. VAT
Grate bar high with high end Hunter Herald 6 high grate bar. This grate bar is the higher of the two types of grate bar that make up the Herald 6 stove grate and has the thinner end. The stove uses 6 of these high bars, and 7 of the low bars. High and low grate bars are placed alternately in the grate frame to make up the stove grate, starting with the low bar.
at £15.23 inc. VAT
Firebricks protect the metal sides of the stoves firebox from damage due to extreme heat. This is the fire brick that goes at the back of the Hunter Herald 6 MK1 multi fuel stove firebox. The brick measures 450 x 115
  • Height: 115mm
  • Width: 450mm
at £36.05 inc. VAT
Door catch single door Hunter herald 6 replacement single door catch
at £43.03 inc. VAT
Baffle plate MK11 and CE Hunter Herald 6 MK11 and CE stoves replacement baffle. Brick baffles are no longer available for these models(part no:HH06065),they have been upgraded to steel baffles. Boiler and non-boiler stoves have different baffles. This is the non-boiler baffle.
  • Depth: 200mm
  • Made of: steel
  • Width: 440mm
at £97.52 inc. VAT
Replacement glass for the single door version of the Hunter Herald 6 stove. This is for the CE version of the stove (there is a metal strip below the baffle with lots of air holes in it). In any case the single door is only available on the Herald 6 CE stove anyway.
  • Depth: 4mm
  • Height: 209mm
  • Width: 364mm
at £63.76 inc. VAT
A glass gasket for the single door version of the Hunter Herald 6 CE stove.
at £8.16 inc. VAT
Rear  firebrick wood Mk2 Hunter Herald 6 woodburning stove replacement rear firebrick. Part no:HH06116. This part is used by stoves that use the simple side firebricks.
at £39.06 inc. VAT
Hunter Herald 6 stove replacement log retainer.
at £47.68 inc. VAT
Hunter Herald 6 stove replacement 6 inch flue damper.
at £72.96 inc. VAT
Hunter Herald 6 stove replacement front rocker bar. This is part of the grate system, supporting the individual grate bars at the front, sometimes referred to as the cam bar.
at £25.55 inc. VAT
Hunter Herald 6 stove replacement back grate support bar. This is part of the grate system, supporting the individual grate bars at the back.
at £32.08 inc. VAT
Hunter Herald 6 stove replacement heatproof airwash gasket. This part is a seal for the airwash system.
at £8.60 inc. VAT
Hunter Herald 6 CE stove replacement glass gasket for double door stove. One gasket for one door is supplied.
at £13.53 inc. VAT
Hunter Herald 6 stove replacement double door catch.
at £15.42 inc. VAT
Hunter Herald 6 CE stove replacement glass. This glass is for the double door newer stove that has cut outs. One glass panel is supplied.
  • Depth: 4mm
  • Height: 218mm
  • Width: 184mm
at £32.69 inc. VAT
Recouping baffle Hunter Herald 6 stove replacement recouping baffle. This will fit MK2 non-boiler stoves that originally had a brick baffle and some CE models including CE Vii. It is a triangular shaped baffle with open sides.
at £100.93 inc. VAT
Hunter Herald 6 stove replacement side plate. Part no:HH06031
at £36.68 inc. VAT
Hunter Herald 6 stove replacement side plate. Part no:HH06032
at £36.68 inc. VAT
Hunter Herald 6 MK2 multifuel stove replacement rear firebrick.
  • Depth: 25mm
  • Height: 130mm
  • Made of: Vicuclad
  • Width: 460mm
at £24.64 inc. VAT
Hunter Herald 6 CE multifuel stove replacement rear firebrick. This part is now supplied in two halves.
  • Height: 90mm
  • Width: 450mm
at £36.05 inc. VAT
Hunter Herald 6 stove replacement knob for air control slider.
at £15.02 inc. VAT
Glass clip and screw set Hunter Herald 6 stove replacement glass clip and screw set. There are four glass clips in this set.
at £7.68 inc. VAT
Hunter Herald 6 CE multifuel and woodburning stove replacement side firebrick. Part no:HH06/111. This is a shaped firebrick.
  • Height: 221mm
  • Width: 238mm
at £47.31 inc. VAT
Hunter Herald 6 CE multifuel stove replacement turbo bar. This is a thin metal bar with holes in it that sits above the rear firebrick and below the baffle plate.
at £75.13 inc. VAT
Hunter Herald 6 multifuel stove replacement catch bar. This bar holds the lower brick in place.
at £30.72 inc. VAT
Hunter Herald 6 CE double door multifuel stove replacement door rope seal kit. This kit is for newer CE models of stove and includes the glue and 2 x glass gaskets.Two different sizes of rope are used. Please note: Long pieces of thick rope go around the outside of each door. Short pieces of thick rope go below the glass across each door. Thin piece of rope goes down the middle where the doors overlap. Flat gaskets are for the glass.
at £41.20 inc. VAT
Side firebrick mutifuel Mk11 Hunter Herald 6 MK11 replacement side firebrick
at £29.63 inc. VAT
Rear firebrick wood MK11 Hunter Herald 6 wood MK11 replacement rear firebrick
at £44.39 inc. VAT
Rear firebrick wood CE Hunter Herald 6 wood CE replacement rear firebrick
at £29.63 inc. VAT
Hunter Herald 6 multifuel stove replacement door hinge.
at £15.36 inc. VAT
Hunter Herald 6 Pre CE replacement two-door seal kit.This kit is for the older models that have rectangular glass panels, not shaped. The kit includes the glue to fix the rope.
at £43.68 inc. VAT
Simple side firebrick for HH6CE vII Hunter Herald 6 CEV11 multifuel stove replacement side firebrick.These are referred to by Hunter as the simple bricks. Part no:HH06115
  • Depth: 25mm
  • Height: 217mm
  • Made of: vermiculite
  • Width: 169mm
at £36.45 inc. VAT