Villager Bayswater Multi Fuel Stove Spare Parts spares

 Villager Bayswater multi fuel stove

The Villager Bayswater is a multi fuel stove - with the ability to burn wood or smokeles fuel & coal. It has a grate & ash pan. It has 2 doors - with glass in the door to view the dancing flames. The outer top edge of both doors have a curve on it - breaking up the square lines. Under the glass window is a small inset design & under the 2 doors is 1 smaller door with a grill in front of it - it is hinged on one side & you have acess to the ash door through here. It is available with a flat top, high or low canopy. You can get a back boiler for the stove - this has an output of 20.000btu - or 5.86kw. The boiler is only available for the low & high canopy model. The stove has a max 8kw output - the flue outlet is 6 inch - 150mm & the flue can come out of the top or back. You will be able to buy spares for this model - just like all the other Villager stoves. Apart from the usual replacement glass & rope, grates & fire bricks - you can also get a fine mesh spark guard for this stove.



Height Width Depth Flue Size Doors
540mm 601mm 360mm 150mm 2
Door sealed with 9mm soft rope seal kit
Read more about the Villager Bayswater multi fuel stove

Spare parts for the Villager Bayswater multi fuel stove:

- Air control knob
- Ashpan
- Ashpit door hinge pin
- Baffle plate
- Blanking plate
- Boiler bung
- Conversion Plate
- Door hinge pin
- Door latch assembly
- Flue collar
- Flue damper
- Glass
- Glass clip set
- Glass gasket
- Grate frame
- Log retainer
- Operating Tool
- Rear firebrick
- Riddle bar
- Rocker arm
- Side firebrick