Spare parts for the Morso Squirrel Standard multifuel stove

This is the traditional model also known as the 1410 stove - produced for many years - you can recognise the traditional Morso Squirrel stove as it has 2 air vents on the front of the door, one at the top above the door and one below the door. A compact stove with a high output - it has therefore been popular in boats, caravans and houses for many years. The Morso 1410 stove is made of cast iron and is a multi fuel stove with a grate and ash pan - so can burn all solid fuels including wood, coal and smokeless fuel. The Morso Squirrel Standard is available with squirrel sides or ribbed sides. You can get spares for the Morso Squirrel 1410 stove - the grates and glass plus fire rope and adhesive are the spares usually ordered. There is also a back boiler available for this stove - but please check the tapping points at the back of the stove - as you can only retro fit the boiler if it is a model with tapping points. You may be interested in our Guide to changing the glass in your Morso Squirrel Standard stove.

Technical data

  • Depth: 438mm
  • Efficiency: 76%
  • Flue Diameter: 125mm
  • Fuel: Multifuel
  • Height: 546mm
  • Height to Centre Rear Flue: 439mm
  • Made of: Cast iron
  • Max Heat Output: 5kW
  • Nominal Heat Output: 4.5kW
  • Width: 388mm

Technical Drawings

Door Sealed With: Morso 8mm rope kit
Glass Sealed With: White thermal tape
replacement stove glass A ceramic glass panel for the Morso Squirrel. There are two types of replacement glass for the Squirrel please check the dimensions of the piece you have with those given here.
at £32.39 inc. VAT
A replacement riddling grate for a Morso Squirrel stove. This goes in the centre of the grate base in the stove and the arm allows the stove grate to be riddled.
at £48.76 inc. VAT
A replacement baffle plate for a Morso Squirrel stove. Sometimes the baffle can burn out through misuse - if you burn coal make sure that you do not fill the stove and then open the air vents fully as this will result in the stove getting too hot. Please note that this baffle is not for the Squirrel fitted with a boiler.
at £110.88 inc. VAT
The stove grate frame for a Morso Squirrel stove also called the Morso 1410 stove.
at £98.75 inc. VAT
The front grate for a Morso Squirrel Standard stove. This Morso stove grate stops the contents of the firebox falling against the window or onto the floor.
at £45.31 inc. VAT
The back fire brick for a Morso Squirrel Standard stove.
  • Height: 150mm
  • Made of: fire brick
  • Width: 300mm
at £26.56 inc. VAT
This is a replacement fire brick for the Morso Squirrel Standard stove. There is one of these fire bricks on on each side of the firebox.
  • Height: 257mm
  • Width: 250mm
at £47.50 inc. VAT
A replacement flue collar for the Morso Squirrel stove. The flue collar is also sometimes called the flue spigot. To hold this part on you may need 2 flue collar screws and two flue collar lugs.
at £48.76 inc. VAT
The Morso Squirrel blanking plate covers the flue exit on the stove not being used.
at £61.25 inc. VAT
A door handle for the Morso squirrel stove.
at £29.69 inc. VAT
A door handle for ash pan door on the Morso squirrel stove.
at £10.94 inc. VAT
This is the door locking mechamism for a Morso Squirrel stove. This locking mechanism is the same for the stove door and the ashpan door. The handle is not included.
at £45.31 inc. VAT
This hinge pin for a Morso Squirrel stove can be used to assemble the door handle and mechamism.
at £5.89 inc. VAT
Glass clip set complete with screws for a Morso Squirrel stove. Four clips and screws are supplied.
at £5.40 inc. VAT
A pair of lugs for the Morso Squirrel flue collar - this holds the collar in place together with the flue collar screws.
at £6.48 inc. VAT
A pair of screws for the Morso Squirrel flue collar - this holds the collar in place together with the flue collar lug.
at £4.22 inc. VAT
A pair of screws for the Morso Squirrel blanking plate - this holds the blanking plate in place together with the blanking plate lugs.
at £4.21 inc. VAT
A pair of lugs for the Morso Squirrel blanking plate - this holds the blanking plate in place together with the blanking plate screw.
at £4.24 inc. VAT
This is a replacement air vent or draught valve - this is the round vent that you turn to regulate the air supply for your Morso Squirrel 1410 stove.
at £29.69 inc. VAT
Morso Squirrel 1410 stove replacement top plate. The top plate does not include the blanking plate.
at £209.22 inc. VAT
Morso Squirrel 1410 non boiler replacement back plate
at £245.28 inc. VAT
Morso Squirrel 1410 stove replacement leg. This leg is 100mm in length.
at £48.76 inc. VAT
Morso Squirrel standard multifuel stove replacement air conductor.
at £48.76 inc. VAT
Morso Squirrel 1410 multifuel stove replacement front plate.
at £334.88 inc. VAT
Morso Squirrel stove replacement door opening tool.
at £29.69 inc. VAT
Morso Squirrel standard stove replacement pair of front grate holders. These act as brackets to hold the front grate in place.
at £29.69 inc. VAT
Morso Squirrel standard multifuel stove replacement smoke shield. This part is sometimes called the draft reducer.
at £48.76 inc. VAT
Replacement grate frame for the Morso Squirrel Standard multifuel stove.
at £98.75 inc. VAT