This medium firebrick for Villager Puffin stoves measures 9 by 4.5 by 1 inches. Two of these bricks are used on the side of the stove without the door handle, one is used on the opposite side, another is used at the rear of the stove. 4 of these firebricks are needed in total.
In the Puffin there are 6 bricks to install. No. 1 is 150mm wide. No. 6 is 100mm wide. All the others are standard 115mm wide bricks. Place Nos. 1& 2 vertically at the back of the stove standing on the grate support brackets. Nos. 3, 4, 5 and 6 are placed vertically behind the retaining clips on each side of the stove and standing on the grate support brackets (Nos. 3 & 4 hold Nos. 1& 2 in position). Please note that No. 6 (the 100mm brick) must be in this position to enable the door to latch.
|Height||Width||Depth||In Stock||Order Time|
|230mm||115mm||25mm||Usually in stock||10 days|
Shipping available outside mainland UK.
£8.30 inc VATGo to the main villager puffin multi fuel stove spare parts page