Coalbrookdale Severn Multi Fuel Stove Spare Parts spares

 Coalbrookdale Severn multi fuel stove

The solid fuel model of this stove is a 2 door model -the glass on the front of the stove has got a decorative lattice work on the doors Under the glass door is a small panel with a picture of a swan on each side - facing the middle of the stove. There is also a decorative panel on the side of the stove. There is a boiler & a non boiler model available. The average heat output is 15kw - for boiler model 10.2kw to boiler & 2.9 to room. The flue outlet size is 150mm The weight without boiler is 227kg 248kg with boiler.



Height Width Depth Flue Size Doors
720mm 675mm 420mm 150mm 2
Door sealed with 10mm ceramic rope seal

Spare parts for the Coalbrookdale Severn multi fuel stove:

- Washer and screw for glass clip
- Air inlet flap complete with pad
- Ash shed left
- Ashpan set
- Blanking plate
- Blanking plate strap
- Bottom grate spacer
- Door catch assembly
- Extension arm
- Flue collar
- Front rocker bar
- Left side firebrick
- Lower front bar
- lower grate bar
- Non boiler model leg
- Operating tool
- Replacement Glass
- replacement Glass clips
- Right side firebrick
- Spare baffle plate
- Thermostat Assembly
- Upper grate bar

Coalbrookdale Severn multi fuel stove exploded spare parts diagrams

If in doubt it is always best to identify which part you need for your stove, then email us with the part numbers you need - we can then point you in the right direction and make sure you get the correct parts.

Click on the exploded parts diagram for the model of Coalbrookdale Severn multi fuel stove that you have

Coalbrookdale Severn doors exploded diagram
Coalbrookdale Severn boiler body exploded diagram